Friday, May 26, 2017

What exactly is Radio Frequency Communication

Radio frequency (often abbreviated as, RF), can be described as any frequency within the electromagnetic spectrum with radio wave propagation that lie in the range extending from about 3 kHz to 300 GHz; this includes the frequencies that are used for communications or the radar signals. That said, you should know that RF generally refers to electrical rather than the mechanical oscillations.

RF communication utilizes radio waves rather than wires to exchange signals, and this is where the term "wireless communication," comes from. RF modules generally use frequencies to distinguish the different radio signals, therefore, in order for the RF modules to communicate, they have to be operating on the same exact frequency. That said, you should know that radio frequency is normally measured in units known as hertz (abbreviated as Hz), which represent number of cycles/second when the ra dio wave(s) is transmitted. 1 hertz (Hz) equals 1 cycle/second, and 1 megahertz (abbreviated as, MHz) equals 1 million cycles/second.

A radio frequency (RF) signal basically refers to the wireless electromagnetic signal that's utilized as a form of communication, when talking about wireless electronics. As mentioned earlier, radio waves are a type of electromagnetic radiation which have identified radio frequencies which usually range from about 3Hz to 300 GHz. Not every radio wave is the same; they can be small or big, or they can be far apart or close together. On the radio stations we normally listen to, every station uses waves which are on a slightly different frequency from the other stations. Whenever you happen to switch from one radio station to another, your radio picks up and then plays waves of that particular frequency.

Frequency normally refers to the oscillation rate of the radio waves. It can also refer to how close together or far apart the waves are. When the radio waves are too far apart, that is known as low frequency, and when the radio waves are close together, that is known as high frequency. That said, you should know that radio frequency propagation happens at speed of light, and doesn't need any medium (such as air) in order for it to travel. Radio frequency waves occur naturally from lightning, the sun flares, and even from stars which radiate radio frequency waves as the get older. However, people usually communicate with man made radio waves which oscillate at various select frequencies.

The man made radio frequency waves are produced by oscillating current for a certain number of times, and radiating it off the conductor (which is referred to as the antenna), into an empty space (this is the space that's occupied by air and not the outer space), as electromagnetic radio waves. The RF signals are received and sent using conductors via the phenomenon that's called the skin effect, where radio frequency current latches itself and then flows through the conductors' surface; this effect is actually the basis and the core of radio technology.

The best thing about RF communication, is that it's omnipresent (that is to mean it's all around us). It plays a crucial role in many of the communications systems which we depend on a daily basis, such as fire and police radio systems, TV and radio broadcasts, and satellite communications. Cordless phones, cellphones, Wireless internet (Wi Fi), and Bluetooth also operate in the radio frequency spectrum. In addition to that, there are other appliances outside of the communications field that use RF. They include; microwave ovens, garage door openers, among others. Some wireless devices such as TV remote controls, cordless computer mice, computer keyboa rds, and even two way radios also operate using RF frequency.

2 way radios are based on the RF frequency and they perform group communication using minimum radio frequency channel resources. This is to mean that if all the users are in the same location or area (most of the time), you will only need a single channel resource in order to talk to them. By using RF, 2 way radios have the capability of facilitating one to many group communication (which is also known as a group call), very efficiently. By efficient, I mean that 1 user can communicate/talk to 1, 5, 10, 100 or even 1000's of users at a go. The 2 way radio user doesnt need to keep on repeating the same message if he/she needs to convey to many users.

Sunday, May 14, 2017

NFL investigating Giants for using two-way radio during game against Cowboys

Apparently using a two way radio during an American football game is frowned upon over in the good old US of A, This article is about a game between the Giants and the Cowboys. During a Game the coaching staff and Quarterback are not allowed to communicate if there is 15 seconds or less on the clock, this rule might have been broken with the use of a walkie talkie.

The NFL is investigating the Giants’ potentially rule-breaking use of a two-way radio during the team’s recent 10-7 win over the Dallas Cowboys.

The use of a two-way radio by a coach during a game is strictly against league rules, according to ESPN.

In the fourth quarter of the Cowboys game, Giants head coach Ben McAdoo was spotted using a walkie-talkie to communicate play calls with Eli Manning after his headset malfunctioned.

In the fourth quarter of the game, Giants head coach Ben McAdoo was spotted using a walkie-talkie to communicate play calls with Eli Manning after his headset malfunctioned.

The Cowboys issued a formal complaint to the league over the radio use, but the NFL’s investigation was already underway by the time Dallas contacted them.

The NFL has a rule against coaches using two-way handheld radios because the league cannot control when both parties are communicating.

A coach using a walkie-talkie makes it harder for the NFL to monitor a league rule that states communication from the sideline to the quarterback must end when 15 seconds are left on the play clock.

With headsets, the NFL has the power to shut off communication at will with a “cutoff switch operator,” ESPN reported.

The Giants had no comment when reached Thursday night.

McAdoo used the walkie talkie in question, however, for about four or five plays on the Giants’ fourth-quarter drive that ended in an Eli Manning interception on a pass intended for Victor Cruz.

McAdoo’s normal equipment malfunctioned and as the Giants worked to fix it, the coach was handed the walkie talkie temporarily because its signal was reaching Manning’s helmet.

As the Giants worked to correct McAdoo’s equipment, Odell Beckham Jr. could be seen running to the sideline to bring plays back to the huddle and Manning was heading over to the sideline, as well.

There is no evidence in reviewing the game film that demonstrates McAdoo was on the walkie talkie for longer than the allowed 15 seconds of communication with his quarterback.

There is also, of course, no evi dence that the Giants gained any advantage even if he was. The drive ended in a turnover and the Giants’ offense stunk most of the night.

2016 year in review: Motorola's resurgence

Motorola have always been a brand we have looked up to, in our eyes they produce some of the best equipment on the market, sometimes they don’t sell as well as they should do. The business has been split and sold several times over the last year, but they are now on the rise and business is going well, as this article shows.

2014 saw Motorola’s ownership change hands from the west to the east. Lenovo acquired the company off Google on January 29, 2014 but it was not until 2016 that the fruits of Lenovo’s ownership started showing up.

The year started off with Motorola in a slightly vulnerable position with the relative failure of both the Moto X Style and Moto X Play. The Moto X line was fading and even the third generation Moto G had f ailed to impress.

These first devices under Lenovo’s ownership however, had been in the pipeline much before Lenovo took over and it was not until the Moto G4 and the Moto Z in 2016 that we saw what the new Motorola could deliver.

Moto G4 series: Ushering in a renaissance

The Moto G4 Plus was one of two variants of Motorola's fourth generation Moto G, the firm's bestselling smartphone range ever. This was the first time Motorola (now owned by Lenovo) launched more than one smartphone in the G range, with the Moto G4, Moto G4 Play and the Moto G4 Plus.

At a starting price of Rs 13,499, the Moto G4 Plus made for a compelling buy, and continued the G series of smartphone's tradition of providing good smartphones at an affordable price. With a superb display, a fast and accurate fingerprint sensor, stock android and great performance, it ticked all the right boxes for a mid-range device.



In comparison to the regular Moto G4, the Moto G4 Plus featured an improved 16MP rear camera with phase auto detection, laser autofocus and a dual LED Flash and also came with a fingerprint sensor.

Motorola also released the Moto G4 Play which was the cheapest device in the G4 lineup at Rs 8,999 and packed a 5-inch 720p HD display, a 2,800mAh battery, 2GB of RAM and 16GB of expandable internal storage.

The Moto G4, G4 Plus and G4 Play were critical as well as commercial hits and announced the comeback of Motorola in the smartphone game. The Plus in particular, presented a fantastic blend of features and affordability that saw it shoot up the sales charts.

Moto E3 Power: The odd one out

Lenovo also unveiled the Moto E3 Power in India which was a more powerful version of the third generation Moto E3. In a surprising move, the company decided against releasing the regular Moto E3 in the country.

The Moto E3 Power came with a massive 3,500mAh battery, 2GB of RAM, a 5-inch HD display and nearly stock Android Marshmallow.

At Rs 7,999, the Moto E3 Power found itself in as odd situation with the much more capable Moto G4 Play priced at just a thousand rupees more.

The attack of the Modular smartphones

Motorola then cemented its position in the smartphone world by releasing the striking Moto Z, the company’s most exciting smartphone in years.

The Moto Z came packed to the gills with a Qualcomm Snapdragon 820 SoC, 4GB of RAM, a 13MP rear camera with OIS and 4K recording, a 5MP front shooter and a 2,600mAh battery along with TurboCharging support.

The ‘World's thinnest premium smartphone’ came with a 5.5-inch QuadHD display protected by corning gorilla glass, a sleek and suave metal/glass body and unlimited feature expansion through the Moto Mods.



The distinguishing feature of the Moto Z were the ‘Moto Mods’: snap-on accessories that could be attached to the back of smartphone through magnets in order to increase its functionality.

Alongside the flagship Moto Z, Motorola also launched its younger brother, the Moto Z Play which came with a 5.5-inch 1080p Super AMOLED display, a downgrade from the QuadHD resolution of the Moto Z and the largest battery Motorola ever put in any of its smartphones. Just like the Moto Z, the Moto Z Play also supported the innovative Moto Mods.

The Moto Z and Moto Z Play helped bring Motorola back into the spotlight. The Moto Mods in particular were greatly appreciated and were hailed as one of the best implementations of the modular concept in recent years.

The stunning all-metal Moto M

The end of the year saw Motorola launching the stunning all-metal Moto M in India.

The Moto M’s full metal unibody design with antenna bands on the top and bottom edges was a complete departure from the design language of previous Motorola smartphones and was again an indication of the company's new ownership.

This is what Sudhin Mathur, Executive Director, Lenovo Mobile Business Group, India had to say about the company's performance in 2016:

“The Moto G franchise continues to be much loved and we witnessed an extremely high conversion from early Moto G buyers opting for the new Moto G 4th Generation. But, our real game changer and technological breakthrough was the Moto Z and Moto Mods series that redefined the evolutionary progress of the smartphone industry. The Moto Z and Moto Mods system is designed to provide connected, intelligent and mobile consumer experiences in a seamless fashion and the power to transform your (Moto Z) smartphone in a snap is revolutionary. We started with four Moto Mods and are continuously working with multiple partners to develop more Mods for smartphone users in 2017.”

What's next?

2017 will be a crucial year for the company as it prepares to build upon the success of the G4 and Z range. It is pivotal for Lenovo to make sure that it retains the essence of the company while at the same time push new boundaries of design and innovation.

The arrival of 5G, cognitive radio and the future of connectivity

We are very excited about 5G, we have already reported on how the UK emergency services are moving over to a LTE network, and inevitably 5G is the next step for better, faster and more capable communications.  Not planned to be deployed until the next decade, we believe that 5G will allow us to communicate better with our Walkie talkies. The original article can be found here.

With faster and more reliable connections, we look at what the next generation of communications could mean for business

From smart cities to the internet of things (IoT), virtually every aspect of the modern world is becoming closely connected.

The extent to which we rely on our devices and the exchange of information means new systems are needed that not only handle far greater bandwidth, but that are capable of being deployed to cover areas that were previously unreachable.

The potential benefits for business are huge, with faster and more reliable connectivity not only enhancing how firms interact with customers and each other, but also lending itself to greater flexible working among staff.

The arrival of 5G

One development that many industry observers believe could be revolutionary is 5G. Following on from 4G, the fifth-generation mobile network is in its early stages of development and is expected to be rolled out between 2020â€"25.

Any tech that contributes towards the next phase of mobile connectivity is covered by the term 5G. And although there are still no set standards or specifications, the GSMA â€" a trade body that represents global mobile operators â€" has outlined eight key criteria, stipulating minimum requirements for speed, capacity and energy in order for something to be considered 5G.

According to Ofcom, once operational 5G could provide between 10â€"50 Gbps (gigabit per seconds) in download speeds (as compared to the 5â€"12 Gbps of 4G), and although most experts expect it to be at the lower end of the range, that would still mean you could download an HD movie in seconds.

But rather than simply being faster than the current 4G, it will also allow more devices to access the web â€" an essential requirement if the IoT is to take off â€" meaning it could be transformative for business.



Raj Sivalingam, executive director of telecoms for techUK, the trade association for the tech sector, says: “The potential of the IoT, particularly in the enterprise environment, has been hugely debated but its i mpact is almost certainly still undervalued.

“Mass deployment across sectors will boost efficiency and safety with pre-emptive fault correction; enable automatic reporting of accidents and allow real-time asset tracking, reducing crime and increasing productivity, to name just a few benefits.”

One potential bottleneck for 5G is spectrum availability â€" or lack of it. Radio frequencies for both 3G and 4G are already overcrowded. The provision of a new bandwidth will require widespread cooperation between operators, manufacturers and governments.

Infrastructure is also an issue, says Sivalingam. “Making the leap to 5G mobile services and getting more fibre into the fixed telecommunications networks will require substantial amounts of investment.

“We need the government and industry stakeholders to work to shift the UK from good levels of connectivity to great levels so that we continue to attract investors and startups, and to foster innovation from within the UK.”

Cognitive radio

One possible solution is cognitive radio. An adaptive radio and network technology, it can sense and respond to its operating environment and automatically tune itself to the best available frequencies, this makes it more reliable in extreme locations where signals are weak, potentially providing dependable, robust connections that are not hampered by interference or geography.

Finland-based KNL Networks has developed a system using the technology that uses short wave radio to transmit internet access to sites in remote locations ranging from oil rigs to polar research stations. KNL Networks CEO Toni Linden says: “We can provide similar connectivity to those from satellites but with a terrestrial radio system. Our radios receive the whole spectrum all the time, so rather than scanning, real-time broadband receiving is going on. Thus we can see and measure everything that’s going on in the spectrum a nd we can maintain the network connectivity that way.”

The tech opens up the possibility of providing seamless connectivity anywhere, giving business reliable online access to markets in parts of the world that have otherwise been unreachable. It could also enable media and other companies to broadcast without the need for expensive satellites.

Quantum key distribution

It’s not just data transmission, speeds and connectivity that pose challenges in the future, but the safety of that data too. Cybercrime is ranked alongside terrorism as among the most serious threats to the UK [pdf], and with data now the lifeblood of modern business, securing that data is of paramount concern. One technology that could provide the answer is quantum communications.

Conventional encryption relies on sending a decryption key alongside your secret data. The receiver then uses that key to decode your secret information. But problems arise because hackers can also copy this key and steal your data.

Quantum key distribution (QKD) is different because it encodes this key on light particles called photons, and an underlying principle of quantum mechanics means that a hacker trying to read or copy such a key would automatically alter its state, effectively leaving a hacker fingerprint so the sender and receiver know their information security had been breached.

China recently launched a quantum satellite to further research into this technology, with the hope of developing an uncrackable communications network.

In the UK, the Quantum Communications Hub is part of a national network of four hubs led by the universities of Birmingham, Glasgow, Oxfor d and York. Director Tim Spiller says: “We are developing quantum communications technologies along a number of different directions, notably short-range free space QKD, where the transmitter could be in future mobile phones, and chip-to-chip QKD through optical fibre, where the chips could be in future computers and other devices.”

With two thirds of British business falling victim to cybercrime in the past year the need for better encryption is clear.

Several companies currently offer commercial quantum key distribution systems include ID Quantique, MagiQ Technologies, QuintessenceLabs, SeQureNet and Toshiba, although its high cost and limited range means mainly banks and governments are its main users, with mainstream adoption still some way off.

Spiller added: “Certainly it would be desirable to improve the size, weight, po wer and cost points of current technologies and our work in the hub and elsewhere is addressing all these factors.”

Paul Lee, head of technology, media, and telecommunications research at Deloitte, highlighted a number of improvements which he expected to see coming down the line, including improved mobile antennae and base stations, as well as improvements to fixed networks such as G.fast that would enable copper cable to operate at much higher speeds.

“As they get steadily faster, new services emerge to exploit these greater speeds, which then requires the deployment of even faster networks. This tail chasing has been going on for decades and won’t stop in 2017.”

Why We Still Choose Wired Covert Earpieces Over Wireless Ones

Advancement in technology has changed the form of how electronic devices look like, how they operate and consequently how we handle them. Devices such as radios have become smaller, lighter and wireless. The advent of Bluetooth has enabled radios to connect without any physical connections; notably saving us from the fuss of tangled and visible wires. The wireless earpieces are in use, but it is important to note that they have not completely taken over from the wired covert earpieces. With the convenience and technological advancement they offer, why is it that they have not replaced their wired counterparts especially in fields of operation? Here are a few thoughts:

Reliability

Wireless earpieces are not as reliable as the wired ones. The technology that supports Bluetooth communication has it that the source device (radio) and the receiving device (earpiece) have to be at a certain distance from each other and nothing should come in between the path of transmission of the two devices. This means that if any of the two requirements are not as anticipated, functionality is compromised. Wired earpieces do not have the complication of interference and limited bandwidth. When you are in a situation where reliability is crucial, where you cannot afford to lose connection, say you are out in the field on operation, it would make sense to use wired covert earpieces as they are easy to handle, making them more reliable.

Limited Operational Lifetime

For a wireless device to be operational, it needs to be charged. When out on assignment, the crew will need to ensure that they have fully charged the wireless earphones and carried a fully-charged extra battery. The batteries work on a limited operational lifetime which burdens the crew as they have to keep replacing the batteries every time. When pack ing batteries for replacement, one should pack enough to cater for both the radio and earphone. This is not the case with the wired pieces. For wired pieces, the crew only has to worry about a single cable that will connect the radio to the earphones. The wired option is therefore less of a burden to handle than the wireless ones.



Necessary Visibility

In some instances, the visibility of the wires, which the wireless earpieces work against, is crucial in making a statement. In a security situation, the wired pieces are visible to the human eye; they make the public aware of the security. The visibility in itself reinforces security, deterring any harmful or criminal practices that may take place. In such a situation, wireless pieces are of no use as no security statement will be made.

Disruption and Negative Interference

Wireless earpieces are vulnerable to signal disruption and negative interference. It is possible for a wireless-transmitted signal to be compromised- an activity that may cause threats and anomalies. A signal transmitted by wireless means may be decrypted and accessed by unauthorized people. At the same time, the signal may be compromised in a way the end product that is received as sound is not what was initially transmitted. Bluetooth is open to any form of interference, be it purposeful or accidental. The wired covert earpiece on the other hand greatly reduce the possibility of such malpractices as it would be hard to physically interfere with transmission without anyone noticing.

Misplacing earpieces during an incident

In the event of an incident, it would be hard to misplace a wired covert earpiece. This is because, when an agent is on the move or if they make any vigorous movements, the security earpiece might be detached from the ear but will not fall; it is tethered to the radio using the wire. On the other hand, a Bluetooth earpiece would probably detach itself from the ear, fall down and be misplaced as it has no physical tethering to the radio device. This will cost an agent a lot of time in looking for a misplaced device and even the responsibility of a lost device.

When it comes to technology, the feature advancements are normally made to our convenience and efficiency but in some cases, the old way of doing things would prove to be better. Wired covert earpieces have major advantages over their wireless counterparts, making them hard to phase out. What the wireless earpieces can function as at this point is as a complimentary device to the wired one.